How to Fit a Shower Tray? [Follow These Steps]

ToolsBrilliance is reader-supported. We may earn a commission through products purchased using links on this page. Learn more about our affiliate disclosure

The shower tray to fit is an important procedure and part of your shower enclosure because it instructs water flow to the drainage point in your bathroom.

Shower trays serve the primary purpose of preventing water leaks. Water has a natural tendency to take the path of least resistance, and once that path has been chosen, it is extremely difficult to reverse.

Shower trays, particularly rectangular shower trays, are designed to redirect the flow of water.

When you shower, the tilt of the tray ensures that the water flows straight to the drain; it’s physics at work. It makes certain that water flows in the proper direction.

The best shower tray in the world will not help you if you do not properly assemble it. Since water flows in the direction of least resistance, it is difficult to redirect it once it has begun to flow in the wrong direction, far from the drainage site.

As a result, installing a shower tray correctly is critical because it ensures quick water drainage, avoids costly leaks, and keeps your bathroom dry.

Types of Shower Trays

  • Ceramic Shower Tray: It’s inexpensive, long-lasting, and stain-resistant, just like a bathroom sink. In contrast, ceramic shower pans are heavy and cold to the touch. Manufacturers prefer stone resin over ceramic because it enables a faster manufacturing process.
  • Acrylic Shower Tray: It’s also widely recognized as an ABS shower tray.  They are as inexpensive as ceramic and are also easy to install.
  • Stone Resin Shower Tray: This tray is made from crushed stone and resin, which is placed into a mould and allowed to cure. Following that, a protective layer of gel is applied to the tray, and a non-slip design is incorporated into the design. Aside from the fact that some models are heavy, there are no disadvantages to using a stone resin shower tray.
  • Acrylic Capped Shower Tray: To achieve a superior finish, it manages to combine the toughness of a resin tray with the attractive appearance of an acrylic sheet.
  • Marble Shower Tray: It is without a doubt the most distinctive shower tray available. Any bathroom shower design will benefit from the use of classic marble. Marble shower trays, on the other hand, have the dual disadvantages of being both heavy and expensive.

How to Fit a Shower Tray?

How to Fit a Shower Tray?

Step1: Mark out the tray position

Place your new shower tray in the general location where it will be installed. Outline the shower tray with a pencil, taking into account any positioning issues. Adjust the adjustable legs that came with your shower tray to an even and desired height. To ensure that it is truly flat, use a spirit level. Check for clearance and alignment problems.

Do not rush through this, and keep in mind to include the shower tray’s central leg to prevent sagging when in use.

Step2: Choose the waste position

Attach the shower tray waste loosely and make sure that the water waste in your bathroom is securely connected below the shower tray. Determine the best path for this connection to take and loosely fit everything so that you are confident in the placement.

The adjustable legs may need to be brought up higher than anticipated at times to allow for the angles of the connection between the shower tray waste and the water waste in your bathroom.

Remember the general rule of 50mm of adjustable shower tray leg for every metre of pip.

Step3: Line up side panels                

To see how the side panels that came with your shower tray will look when finished, line them up.

Keep an eye on the guidelines that came with your easily adjustable shower tray because they will tell you the minimum and maximum shower tray heights for both the extendable legs and the shower tray side panels.

The side panels may need to be trimmed for a flush finish depending on the height of your shower tray. Follow the manufacturer’s instructions for this process, which is typically done with a hacksaw or jigsaw.

Step4: Check the tray is level

Check to ensure that all of your shower tray’s adjustable legs are fully tightened and flush, and that all seals are firmly attached.

Examine your instructions for attaching the shower tray legs to the floor, which could be accomplished with specially made adhesive pads or drill-fit screws.

Check that the shower tray is completely level with the bathroom floor using the spirit level. If the shower tray is uneven, it will cause a slew of drainage problems.

Do not believe that a slight uneven distribution in the direction of the shower tray waste will aid drainage; shower trays are crafted to channel water toward the waste when flat.

Step5: Attach the waste

Connect the underside of your shower tray waste trap to your water waste.

Pour half a large kettle or jug of cold water through the waste in your shower tray. If there is any leakage, disconnect and re-connect all connections. Before applying any sealant, make sure everything is watertight.

Step6: Apply sealant

It’s time to seal everything up now that your shower tray waste has been safely connected to your bathroom water waste and your shower tray side panels have been trimmed to accommodate your setup.

Take your silicone sealant and carefully seal it around the edges of the shower tray.

Begin by going around the edges of the tray where it meets the bathroom walls. This is your initial seal. Apply all sealant lines evenly and allow setting for the recommended time, which can be up to 24 hours.

Step7: Complete the surrounding walls

You can finish the walls around the shower tray once your shower tray is sealed and in place. Leave a 3mm gap between the tiles and your shower tray when tiling or installing wall panels.

Now, apply a sealant to the gap, making sure it reaches the bottom. This is your secondary seal, and it is the most important one for ensuring a watertight shower experience.

Step8: Install the side panels

It’s time to put the shower tray side panels in place. Typically, these will snap into place around the shower tray’s adjustable legs using the provided clips.

As an extra fixing point or simply to assist the panels, you can also use lengths of timber flush behind the line where the shower panels will run.

Read: How to Clean Shower Glass?


How to Fit a Shower Tray?

It is an important feature of your shower enclosure because it directs the flow of water to the drainage point in your bathroom.

To learn how to properly install a shower tray, follow the steps outlined above.


What do you use to secure a shower tray?

Cover the entire underside of the tray with tiles adhesive, silicone, or a weak cement mix (5 parts sand/ 1 part cement). The tray’s lowest point should be at least 5mm thick. To ensure the tray is level, more may be required in some areas.

What do users put under the shower base?

Mortar is advised to be used beneath all shower pans. Mortar reduces the possibility of your pan slipping or cracking as a result of an uneven surface.

We will be happy to hear your thoughts

Leave a reply

Tools Brilliance
Enable registration in settings - general