How to Cut Skirting Boards with a Mitre Saw?

ToolsBrilliance is reader-supported. We may earn a commission through products purchased using links on this page. Learn more about our affiliate disclosure

A mitre saw is a type of saw that uses a mounted blade to make precise crosscuts and mitres in a workpiece.

This is accomplished by lowering a mounted circular saw blade onto a flat surface beneath the object. It may be dropped at various angles onto a board that is positioned against a backstop called the fence.

Trimming and moulding, as well as mitres and crosscuts on a workpiece, are all common applications.

It can cut metal, stone, and plastics, as long as the appropriate blade is utilised for the job. It will help you make clean, precise cuts and a range of angle cuts on components wherever you go.

The mitre saw has a few limitations, one of which is that it can only create angled and bevelled cuts. Since it can cut anything, it lacks adaptability.

They are more expensive and have a broader variety of capabilities, which makes them more difficult to use and inappropriate for beginners.

Types of Mitre Saws

  • Compound Mitre Saw: This sort of mitre saw has the extra benefit of allowing the blade and head to be inclined at different angles to the workpiece.

This allows for bevel cuts. A bevel cut is a ramped, angled cut into the side of a piece of wood. A compound cut is a combination of a mitre and a bevel cut that’s commonly utilised in home trim work.

  • Dual-compound Mitre Saw: Dual or double compound saws allow the head to rotate when both the left and right sides are tilted. This means that all angles can be attained without the workpiece needing to be relocated.
  • LED Mitre Saw: A laser guide is built into some saws for more precise cutting.

The laser, which is positioned on the saw blade and lights the cutting line, is a disc-shaped washer. Some saws also have an LED light that helps to illuminate the work area more effectively.

  • Sliding-compound Mitre Saw: Sliding mitre saws, like radial arm saws, use a sliding rail to move the saw head back and forth.

The size range of a board that can be sliced increases as a result of this. For straight and pull-down cuts, this type of saw may also lock the rails.

  • Power Mitre Saw: A motorised variation that can perform straight crosscuts on a piece of work from a variety of angles. They’re commonly used to make 45-degree framing straight cuts.

Applications of Mitre Saw

Mitre saws are most commonly used for cutting wood trim and moulding, but they can also be used to cut metal, masonry, and plastics if the right blade is used for the job.

They also feature consistently precise and accurate cutting. The mitre saw will help you produce smooth, precise cuts anywhere you want, regardless of the material you’re dealing with.

How to Cut Skirting Boards with a Mitre Saw?

Step1

Mark where the corner of the wall is on a piece of skirting board by lining it up with the wall. Mark your board with a pencil and a ruler. If you want your corners to fit together, this is a critical step. Draw an arrow on the wood pointing left if your skirting board sits to the left of the corner. Draw an arrow pointing right on the timber if the board is on the right side of the corner in the same way.

Step2

A mitre box is a tool that assists you in cutting at the proper angles. It must be attached to something for the box to remain stable. Consider mounting it to your workbench if you’re a regular carpenter. Place screws in the mitre box’s holes and drive them into the wood using a drill.

Step3

Insert the skirting board into the mitre box’s open slit. Place the skirting board in the centre of the mitre box, so you’ll have to cut it in the middle at the end. Place the saw into the space in the mitre box that points left if the arrow you created on the skirting board points left. Place the saw into the gap that points to the right if the arrow on the skirting board points to the right.

Step4

While moving the saw back and forth, keep consistent pressure on it. Instead of quick motions, try to use long, steady strokes. Continue to chop through the wood with the saw until it’s completely gone. After you’ve finished cutting the board, take it out of the mitre box. Back and forth over the freshly cut wood with a piece of 100-grit sandpaper. For about a minute, sand the wood.

Step5

The skirting board should be placed against the wall. If one skirting board is longer than the other, the longer board must be planned down to size. To remove little shavings of wood, push the planer across the wood at the same angle as the original cut. Check to see if the boards are still compatible.

Conclusion

How to Cut Skirting Boards with a Mitre Saw?

By putting a mounted blade onto the board, it cuts precise crosscuts and mitres in a workpiece. How to cut skirting boards using a mitre saw can be learned by following the methods outlined above.

Read: 6 Tips To Know How To Make a Table Saw

FAQs:

  1. What is the purpose of a mitre saw?

They’re made for angled cuts in moulding, trim, rafters, and other common carpentry projects. Mitre saws may also be used to make straight crosscuts, and their versatility, when combined with the correct blade, makes them an essential tool for both professional carpenters and DIYers.

  • Is it possible to cut horizontally with a mitre saw?

It cuts wood and other materials at a 90° angle using a vertical axis. A mitre saw is a type of chop saw that allows for angled cuts by moving not only on a vertical but also a horizontal axis.

We will be happy to hear your thoughts

Leave a reply

Tools Brilliance
Logo
Enable registration in settings - general